UV dtf transfer wrap 23cmx11cm 16oz #12

1 x UV DTF transfer 23cmx11cm 

Waterproof and scratch-proof (but not recommended for Dishwasher) 

Can be used on Glass or acrylic Libby cups (not frosted), Tumblers, Mugs, Bottles, smooth wood, plastic, windows, or any hard surface.

We are not responsible for any transfers that are pressed incorrectly. Make sure you are following pressing instructions, For instructions on how to apply this transfer are included or please find some videos on our insta, tiktok, or Facebook 

These UV DTF transfer wraps will pimp any drink, mug, tumbler, diary, journal, planner, candles, helmets, cars, motorcycles, kids jeeps, acrylic photo frames, glass photo frames, vases, bowls...anything....they come ready to stick 

I have a limited supply for bulk orders of a specific product please contact me 

This listing is for 1x single Uv dtf wrap 23cmx11cm 

This listing is for the wrap only not digital download 

1. Prep Your Surface and Pre-Squeegee Your UV-DTF Permasticker

Prepping the Area - When necessary, clean the surface of your item before applying, The cleaner the surface, the longer it will endure natural elements, washing, and wear and tear. Although it will adhere without this, it is recommended.

Pre-Squeegee - After cutting your sticker/decal out, place the design face down with the white side facing up. Using the padded end of the included squeegee, run over the whole design with hard pressure, back and forth 2-4 times. Additional pressure and repetitions should be applied on thin and separated design elements, such as small text.

2. Preparing your UV DTF for Transfer

Gently peel the two sheets apart, watching to ensure the whole design lifts off onto the top carrier sheet. We have a saying in the Dojo - Don’t peel with your hands, peel with your EYES. Designs which contain thin lines and small separated elements, such as small text, the slower you should peel. If parts don't lift, re-squeegee from behind, and attempt to peel again from a different angle. You’ll get a feel for it with 

After placing the design, firmly squeegee it 2-4 times. Peel slowly, watching to ensure all elements stick. If any part of the design is not adhering, lay the carrier sheet back down, re-squeegee and try peeling from a different angle.